Dongguan Liyi Environmental Technology Co., Ltd.
Professional Environmental Test Chamber Manufacturer
Add to Cart
LIYI 150L Internal Volume Thermal Shock Test Equipment Separate Control With Glass Window
Machine introduction:
Separate Control with Glass Window Thermal Shock Test Equipment 150L Internal Volume For Automotive Parts is divided into two-box and three-box type, the difference is that the test method and internal structure are different, the product conforms to the standard: GB/T2423.1-2008 test A, GB/T2423.2-2008 test B, GB- T10592-2008, GJB150.3-198, GJB360A-96 Method
The hot and cold impact test box is a necessary test equipment for metal, plastics, rubber, electronics and other materials industries. It is used to test the structure of materials or composite materials, and can tolerance it under extremely high temperature and extremely low temperature in a continuous environment.
The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time.
Standards:
● GB-2423．1-89(IEC68-2-1)Test Mode A:Low Temperature Test
● GB-2423．2-89(IEC68-2-2)Test Mode B:High Temperature Test
● GJB360．8-87(MIL-STD．202F)High Temperature Life Test
● GBJl50．3(MIL-STD-810D)High Temperature Test
● GJBl50．4(MIL-STD-810D)Low Temperature Test
Specifications:(all can customize)
| Model | LY-TS-42 | LY-TS-80 | LY-TS-150 | LY-TS-225 | |||
| Test chamber volumn(L) | 42 | 80 | 150 | 225 | |||
| Test method | Pneumatic throttle switching 2 chambers or 3 chambers | ||||||
| Index | High Temperature chamber | Pre-heating temperature range | ＋60～＋200℃ | ||||
| Heating speed ※1 | ＋60→＋200℃≤20min | ||||||
| Low temperature chamber | Pre-cooling temperature range | －60－0℃ | |||||
| Cooling speed ※1 | ＋20→－75℃≤80min | ||||||
| Test chamber | Temperature deviation | ±2℃ | |||||
| Thermal shock temperature range | -40→＋150℃ (or customize) | ||||||
| Temperature recovery time※2 | Less than 5min | ||||||
| Sample shelf max load | 30kg | ||||||
| Allowed sample weight | 7.5kg | 7.5kg | 10kg | 10kg | |||
| Test chamber inner size(mm) | W | 400 | 400 | 500 | 500 | ||
| H | 350 | 500 | 600 | 700 | |||
| D | 300 | 400 | 500 | 600 | |||
| Overall size(mm) | W | 1360 | 1460 | 1560 | 1880 | ||
| H | 1800 | 1840 | 1940 | 2040 | |||
| D | 1400 | 1500 | 1600 | 1900 | |||
| ※1. Heating and cooling speed are both empty chamber working condition. | |||||||
| ※2. Recovery condition:Room temperature ＋25℃ and cycling water temperature ＋25℃,Test samples evenly distributed | |||||||
Structure Features
Wall material:Top-grade Carbon Steel Plate,Surface electrostatic color Spray processing
Inner wall material:Stainless Steel Plate SUS304
Body insulation material:Rigid polyurethane Foam + glass fiber
Door insulation material:Rigid Polyurethane Foam + Glass fiber